HOME  2014UnimaxNYC



  11TH14 Repro FX Stencil Thermal Copy Paper

4-Part Stencil Paper for use with Thermal Copy Machine

1) The top layer is white.
The white top layer will have the final image on its underside.
It feeds through the stencil machine with the white side up.


2) Next layer down is a Thin Brown protective sheet, loose (not bound in)
to protect the purple coated layer during shipping and storage.
If you leave it in, the image will be transfered this sheet.

3) The "Purple" layer
This is not carbon but crystalline violet and caruba wax, non-toxic and safe for skin.
The purple coating creates the image which is transferred to the back of the upper white sheet.
It will be in reverse so that when it is applied it is correct reading.

4) The bottom Yellow sheet
holds the original artwork in place when sending it through the machine. 
 

"By Hand" 3-Part Stencil Paper without using Thermal Copier

1) The top layer is White.
This is the layer that will have the final image on its underside.
Draw directly or place artwork on top and copy lines pressing hard.

2) The "Purple" layer
This is not carbon but crystalline violet and caruba wax, non-toxic and safe for skin.
The purple coating creates the image which is transferred to the back of the upper white sheet.
It will be in reverse so that when it is applied it is correct reading.

4) The bottom White sheet
holds everything in place.
 

Repair Instructions

ReproFX Stencil Paper
Bona Fide Authentic Repro FX Made in USA,
Best used with a
copy-machine-copied original.
Does not work with pencil and some markers and pens.
#11TH14 8-1/2 x 11" BOX
$32.49/Box of 100
#11TH15 8-1/2 x 11" 10 Pack
$5.00/Pack of 10 Sets
#11TH16 8-1/2 x 14"
$38.90/Box of 100
#11TH17 8-1/2 x 14"
$6.00/Pack of 10 Set
 
Thermal Carrier for Machine Use
Used to create a more uniform stencil.
Insert the whole stencil set in the carrier
and feed through your machine.
Carrier Size 8-1/2" x 14"

Use a Carrier to
Make a Better Stencil


#11TH18, $12.50 Ea
The COLOR of the carrier
does not make a difference.

Clear or Blue is supplied
depending on availability.

The "Color" does not affect the quality of the finished stencil because the bulb heats the ink and melts the purple which sticks on the white sheet. The color does not affect the heat transfer.

 It is better than no carrier because belt  contact is smoother,
This is what improves the uniformity of the stencil quality.